Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
To refit the shelf, hold it so it is slightly up at the
front and rest the back of the shelf on the side
wires. Push the shelf to the back of the oven and
then lower the front so that it is resting on the side
wires.

Storage

The bottom drawer is for storing oven trays and
other cooking utensils.
It can get very warm so don't store anything in it
that may melt or catch fire.
The drawer can be removed completely for
cleaning etc.
To remove the drawer
Pull the drawer forward. Lift up the ends of the
plastic clips (one each side) to release the catches
holding the drawer to the side runners and at the
same time pull the drawer forward and away from
the side runners.
To remove a shelf
first make sure it is
pushed fully back, so
that the shelf stop is
in line with the kink
in the side of the
shelf.
Lift up the front of
the shelf so the shelf
will pass over the
shelf stop.
Pull the shelf forward.
For safety's sake push the drawer runners back out
of the way.
To refit the draw
To replace the drawer in the cooker, pull the side
rails fully out.
Carefully move the drawer back between the rails
and rest it on the side rails.
12
At each side
hold the front of
the drawer and
pull the side rail
forward so that
the clips click into
position holding
the drawer to the
side rails

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

1092 ct mixte

Table des Matières