Technical Data; Specified Conditions Of Use - Güde GMH 550 Traduction Du Mode D'emploi D'origine

Technical Data

HEDGE TRIMMER
Art. No
Contents
Motor output
Max. engine speed
Knife speed
tank capacity
Fuel consumption
Fuel mix
Beam length
Cutting length
Max. cut thickness
Weight
Noise details
Sound pressure level L
Measured sound power level L
Measured according to
Wear ear protectors!
Vibration details
Vibration emission value a
Total vibration values (triaxial vector sum) ermittelt entsprechend EN ISO 10517
Uncertainty K = 1,5 m/s
2
WARNING: The vibration emission level will vary because of the ways in which a power tool can be used and
may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down
or when it is running but not actually in use. This may significantly reduce the vibratory load over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organisation of work patterns.
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
1)
pA
2)
WA
EN ISO 10517; 2000/14/ EG; Uncertainty K = 3 dB (A)
1) 2)
h
Use the appliance only outside, never use it in
confined and bad ventilated areas.

Specified Conditions Of Use

The hedge trimmer has been designed to cut hedges
and brushes in private house gardens or hobby
gardens..
Do not use this product in any other way as stated for
ENGLISH
19
GMH 550
93997
25,4 ccm
0,75 kW/1 PS
8500 min
-1
2000 min
-1
0,6 l
1,1 l/h
40:1
590 mm
510 mm
26 mm
5,3 kg
89,3 dB (A)
103,6 dB (A)
10,23 m/s
2