Operator Requirements; Technical Specifications - Güde GRT 550 Mode D'emploi Original

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 12
Introduction
To enjoy your new appliance as long as possible, please
read carefully the Operating Instructions and the attached
safety instructions before putting the appliance into
operation. We also recommend keeping the Operating
Instructions for future reference.
Making technical changes to improve the appliance as
part of the continuous product development reserved.
Illustrations may therefore be different.
This document represents the original Operating
Instructions.
Supply includes - pic. B
Take the appliance out of the transport container and
check whether there are the following parts:
1.
Grass trimmer
2.
Handle
3.
Spool cover
4.
Fastening screws
5.
Spare spool
6.
Edge guide
If any parts are missing or are damaged, please contact
your dealer.
Use as designated
String trimmer for fast and comfortable lawn treatment.
For easy removal of grass and weed under bushes, banks
and on edges.
Works other than those for which the appliance has been
designed and which are specified in the Operating
Instructions cannot be performed with this appliance.
Any other use will be considered a use in conflict with the
designation. The manufacturer will not be liable for any
consequential damage and injuries. Please be sure to
know that the appliance has not been designed for
industrial purposes.
Appliance description (pic. A)
1.
Handle
2.
Operating handle
3.
Hand throttle
4.
Cable lock
5.
Feeder cable
6.
Extension tube
7.
Cutting head lock
8.
Spool of string cover
9.
Spool of string
10. String cut-off knife
11. Engine head
12. Extension tube lock
13. Edge guide

Technical specifications

Connection:
Protection class:
Protection type:
Max. output:
Engine speed:
Cutting width:
Ø spool of string:
Operating handle height:
Feeder cable:
Weight:
230 V ~ 50 Hz
II
IP X0
550 W
10,000 per min-1
300 mm
1.6 mm
840 -1070 mm
350 mm
2,3 kg

Operator requirements

The operator must carefully read the Operating
Instructions before using the appliance.
Qualification
No special qualification is necessary for using the
appliance apart from detailed instruction by an expert.
Minimum age
The appliance can only be operated by persons over 16
years of age. An exception includes youngsters operating
the appliance within their professional education to
achieve necessary skills under trainer's supervision.
Training
Using the appliance only requires appropriate instructions
by a professional or reading the Operating Instructions. No
special training necessary.
Before putting the appliance into operation
Safety instructions
The Operating Instructions must be read thoroughly before
using the appliance for the first time. If there are any
doubts regarding the appliance connection and operation,
please contact the manufacturer (service department).
FOLLOW CAREFULLY THESE INSTRUCTIONS TO
PROVIDE A HIGH LEVEL OF SAFETY:
Caution! To be plugged in a network with a safety
switch against stray current (FI) only!
1.
At all times, keep your hands and feet in a sufficient
distance from the string, in particular, when starting
the appliance. Hand on the additional handle should
always be free.
2.
At all times, keep the appliance in an adequate safe
distance from your body and take a stable posture.
3.
A protective face shield/protective glasses, helmet
and safety shoes and gloves should always be worn.
4.
Work with the appliance under adequate visibility
only.
5.
Do not use the appliance when working and when the
grass is wet.
6.
Check the appliance for any damage before using it
or after an impact and repair it if necessary.
7.
Do not use the appliance if the protective equipment
is damaged or fitted wrongly.
8.
Make sure the engine ventilation slots are always with
no dirt or remains.
9.
Make sure there are no persons or animals around at
least 3 m from the place of your work. Switch the
appliance immediately off if persons, especially
children, get near the appliance.
10. Do not get near the rotating parts (near the string)
when the appliance is running.
11. Before using the appliance, remove any stones,
branches and any other solid materials from the area
you are going to work on.
12. Pay a maximum attention when the string is
extended. After taking this step, the right operating
posture needs to be taken before putting the
appliance into operation.
13. Do not use metal spools. Be sure to know that the
appliance runs for five more seconds after releasing
the switch.
Označení
Marking
Product safety:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

95171

Table des Matières