Technical Specifications - Güde GRT 250 P Mode D'emploi Original

Introduction
To enjoy your new appliance as long as possible, please
read carefully the Operating Instructions and the attached
safety instructions before putting the appliance into
operation. We also recommend keeping the Operating
Instructions for future reference.
Making technical changes to improve the appliance as
part of the continuous product development reserved.
Illustrations may therefore be different.
This document represents the original Operating
Instructions.
Supply includes, pic. B
Take the appliance out of the transport container and
check whether there are the following parts:
•
Part with handle
•
Part with engine and pre-fitted spool
•
Handle
• Spool cover
•
Spare spool
•
Fixing material
(3 bolts + 2 nuts)
If any parts are missing or are damaged, please contact
your dealer.
Use as designated
String trimmer for fast and comfortable lawn treatment.
For easy removal of grass and weed under bushes, banks
and on edges.
The appliance cannot be used for other works than those
for which it has been designed and which are specified in
the Operating Instructions.
Any other use will be considered a use in conflict with the
designation. The manufacturer will not be liable for any
consequential damage and injuries. Please be sure to
know that the appliance has not been designed for
industrial purposes.
Appliance description (pic. A)
1. Fixture
2. Handle
3. Feeder cable
4. Feeder cable/cable strain relief lock
5. Hand throttle
6. Bayonet cap
7. Spool of string cover
8. Spool of string
9. String cut-off knife

Technical specifications

Connection:
Protection class:
Protection type:
Max. output:
Engine speed:
Cutting width:
Ø spool of string:
Operating handle height:
Feeder cable:
Weight:
230 V ~ 50 Hz
II
IPX0
250 W
14,000 per min-1
200 mm
1.2 mm
780 mm
300 mm
1.2 kg
Operator requirements
The operator must carefully read the Operating
Instructions before using the appliance.
Qualification
No special qualification is necessary for using the
appliance apart from detailed instruction by an expert.
Minimum age
The appliance can only be operated by persons over 16
years of age. An exception includes youngsters operating
the appliance within their professional education to
achieve necessary skills under trainer's supervision.
Training
Using the appliance only requires appropriate instructions
by a professional or reading the Operating Instructions. No
special training necessary.
Before putting the appliance into operation
Assembly
Screw the part with handle (pic. B/4) and part with engine
(pic. B/5) to each other. Fix both parts with a bolt and nut
(pic. 2/B; pic.C).
Fix the spool cover (pic. B/7) to the appliance head (pic. D)
with a bolt (pic. B/3).
Mount the fixture (pic. B/6) to the handle using a bolt and
nut (pic. 1/B; pic. E-F).
Please make sure the assembled parts are firmly
tightened.
Before putting the appliance into operation, check
it for the following:
• Cable not damaged
• Perfect state of the protection and cutting equipment
•
Firm tightening of all the screwing
Safety instructions
Please read carefully the Operating Instructions before
using the appliance for the first time. If there are any
doubts regarding the appliance connection and operation,
please contact the manufacturer (service department).
PLEASE FOLLOW CAREFULLY THESE
INSTRUCTIONS TO ENSURE HIGH SAFETY LEVEL:
Caution! To be plugged to network with safety
switch against stray current (FI) only!
1. At all times, keep your hands and feet in a sufficient
distance from the string, especially when starting the
engine. The hand on the additional handle should
always be free
2. At all times, keep the appliance in a reasonable safe
distance from your body and take a stable posture.
3. A protective face shield/protective glasses, helmet
and safety shoes and gloves should always be worn.
4. Appliance to be worked with only under adequate
visibility.
5. Do not use the appliance when raining and when the
grass is wet.
6. Check the appliance for any damage before using it
or after hitting any object and have it repaired if
necessary.
7. Do not use the appliance if any protection equipment
is damaged or assembled inappropriately.
8