Technical Specifications - SORHEA COLIRIS II Notice D'installation

SORHEA

12 TECHNICAL SPECIFICATIONS

Maximum indoor detection distance
Maximum outdoor detection distance with
heater
Detection mode
Number of cells for 1 direction
Detection mode
Response time of intrusion alarm
Response time of alarm disqualification
Intrusion alarm typical duration
Power Supply
• Electronic
• Heater
« Tamper alarm » output by relay contact
(NC with alarm off)
« Intrusion alarm » output by relay contact
(NC with alarm off)
« Disqualification alarm » output by relay
contact (NC with alarm off)
Operating temperature with thermostat
controlled heating
Relative humidity
Protection Index
Column weights: (Not including 230V AC
power supply and battery)
• COLIRIS II 50/100/200 1M10
• COLIRIS II
• COLIRIS II 50/100/200 1M90
Electromagnetic compatibility
Cell orientation
Integrated alignment tools
COLIRIS II 50 COLIRIS II 100
125m
50m
Pulsed infrared cells with four selectable frequencies
(channels). Wave length 950 nm
Time-delayed bi-directional
Adjustable from 45 ms to 800 ms
1 minute non adjustable
Interruption time of beams with 4 second minimum
10.5 to 14.5V DC
10 to 15V AC/DC
30V AC/DC – 50mA
30V AC/DC – 50mA
30V AC/DC – 50mA
95% max without condensation
Compliance with European standards (label CE)
Horizontal: Vertical +/- 10°
Optical sights, bar graph with 3 indicator lights and a
buzzer signal indicating the reception quality of the
incoming signal
- 40 -
COLIRIS II 50/100/200
COLIRIS II 200
250m
100m
3 to 4
-25°C / +55°C
IP 335
4Kg
5Kg
6.5Kg
500 m
200 m