Technical Specifications - SORHEA MIRIS 3000 Notice D'installation

SORHEA
10

TECHNICAL SPECIFICATIONS

Maximum indoor detection distance
Maximum outdoor detection distance
Type of detection
Number of cells
Detection mode
Intrusion alarm standard duration
Power supply electronics
Power supply heater
Operating temperature with thermostat controlled
heating
Relative humidity
Electromagnetic compatibility
Cell orientation
Tamper alarm switch capacity by NC contact,
alarm status off
Intrusion alarm capacity by NC contact, alarm
status off
Disqualification alarm capacity by NC contact,
alarm status off
250 m / 820 ft
100 m / 328 ft
Multiplexed infrared beams
Wave length 950 nm
2 to 8, grouped into modules of 2 cells
Dual-beam detection or mono-beam detection
Interruption time of beams with a 4s minimum
10 to 15V DC
10 to 15V AC/DC
- 35°C to + 70°C / - 31°F to + 158°F
95% max. non-condensing
Conform to European standards
Horizontal: +/- 90° - Vertical: +/- 10°
30V DC – 0.1A
30V DC – 1A
30V DC – 1A
- 52 -
MIRIS 3000 / 3100
(label C E)