Wiring Coliris Ii To 230V Ac (Optional Power Supply); Low Consumption Mode - SORHEA COLIRIS II Notice D'installation

SORHEA
Grounding of the
cable shielding.

6.2 Wiring COLIRIS II to 230V AC (optional power supply)

Towards
electronics

6.3 Low consumption mode

Switch 3 permits disactivation of the control unit output switches to lower power consumption. Switch
3 in « Output OFF » position disactivates the output switches and activates the output switches when
in the « Output ON » position.
Power supply
230V AC + earth
Switch 3 in position
« Output ON »
1
FU1 : Fuse 0.5A slow-blow 230VAC power
mains
FU2 : Fuse 0.5A fast 12Vdc electronics
FU3 : Fuse 1A fast heater
Note : in the event of interruption of 230 V AC, the
heating system is deactivated.
(by default)
- 30 -
COLIRIS II 50/100/200
Tamper switch between
terminal 1 and 2
2
Switch 3 in position
« Output OFF »