Setting The Temperature - Bartscher 4300 PS-Vapor Mode D'emploi

The temperature can be set from 0 to 290
temperature control dial.
NOTE!
Prior to each use, pre-heat the convection oven. Set the temperature to approx. 30° C
higher than the desired temperature. After placing the food product into the
convection oven, set the desired temperature. In this way, even cooking is ensured.
NOTE!
It is especially important to pre-heat the convection oven when baking cakes.
NOTE!
Always use the humidity function when the cooking chamber is already hot.
Usually a short spray at the beginning of cooking is enough.
In the following models, spraying is controlled manually using the button marked
206.772, 205.774, 106.778, 105.790, 105.777. These units (except for 106.778) can be
connected to a permanent water source.
Convection oven 106.778 is equipped with a glass
container for generating humidity. It is located at the
right side of the unit in a specially designed chamber.
Open the chamber door and remove the glass
container. Unscrew the cover with pump.
Fill the glass container with water and replace it in the
chamber.

Setting the temperature

°
C. The desired temperature is set using the
Humidity function
:
- 35 -