Functions - Adam Equipment Eclipse EBL Série Notice D'utilisation

EN

10.4 FUNCTIONS

When weighing, the user can access the applications that have been enabled (see section
13.2.).
The following applications are available:
• Weighing
• Parts counting
• Percent weighing
• Check weighing
• Animal (Dynamic) weighing
• Net/Total & Accumulation
• Density determination (Liquid & Solid)
The selectable functions can be enabled in supervisor mode and are selected by pressing
the [Mode] key to enter selection mode. The display will go blank and text will appear on
the upper display line, such as "
keys to cycle through functions, and press [Select] to confirm your selection, or press one
of the [ 0/T] keys at any time to return to normal weighing mode.
© Adam Equipment Company 2015
PARTS PARTS PARTS PARTS PERCENT PERCENT PERCENT PERCENT CHECK CHECK CHECK CHECK
", " ", " ", etc. Use the [Up] and [Down] symbol
21
3016612482 Rev1-Aug15