Keypad - Adam Equipment Eclipse EBL Série Notice D'utilisation

EN

8 KEYPAD

The keypad has the following keys to operate the balance.
Keys
[ 0/T]
[Cal]
[Print]
[Mode]
[Unit]
[Select]
© Adam Equipment Company 2015
Primary function
[POWER] To turn the balance to ON or Standby
[ 0/T] A combined zero and tare function.
Also used to escape from setup functions and modes.
[Cal] Starts the calibration function
[Print] Instructs the balance to print data
[Mode] Enters the Mode Selection Menu
[Unit] Selects weighing units by cycling through a set of
enabled units.
[Select] Enters the setup parameters (Supervisor Menus).
Enters a function or saves a value while manually entering
unit weight or check weighing limits.
15
3016612482 Rev1-Aug15