Control Port (Relays) (Subminiature-D, 15-Pole, Sockets) - Hydac FluidControl Unit FCU 8000-1 Série Manuel D'utilisation Et D'entretien

Operating and Maintenance Instruction FCU 8000-1 series

5.5.5 Control port (relays) (subminiature-D, 15-pole, sockets)

5.5.5.1 Contact assignment (switching position when FCU ready-for-operation)
Relay 1
programmable by user
Relay 2
programmable by user
Relay 3
device ready
The relay contacts capacity is 2A.
Pin 1 : 24 V operating voltage (12 V battery operation), max 200 mA load
Pin 4 : operating earth (GND)
(Pins 2, 3, 5, 9, 10 are in use for operating the BottleSampling Unit BSU 8110)
HYDAC Filtertechnik GmbH
Doc.: 3109776 Ed.: 01/13.02.2002
6 N/C
7 N/O
common
8
13 N/C
14 N/O
15 common
11 N/C
common
12
E
Page 83