Printing Online Logs During Active Measurement; Printing-Out Stored Logs - Hydac FluidControl Unit FCU 8000-1 Série Manuel D'utilisation Et D'entretien

Operating and Maintenance Instruction FCU 8000-1 series

7.4.1 Printing online logs during active measurement

Description
Documentation of continuous measurement by printing out the results via the built-in
printer.
Typical application
The flushing process on a hydraulic unit is to be documented over the whole cleaning
period, until a specific cleanliness class is achieved.
Operation
print
PRINT
+
ok
start
-

7.4.2 Printing-out stored logs

Description
Using this mode of operation enables the user to call up measurements carried out in the
past and to print them out. The sub-menu enables selection according to different search
functions.
· The log number (is stored continuously as a consecutive number)
· The date (is stored automatically at the same time as the measurement)
· The measuring position (must be input by the user)
· By date and measuring position
Typical application
To compare the actual condition data relating to oil cleanliness in a hydraulic system,
previous measurement data must be accessed.
HYDAC Filtertechnik GmbH
Logs
Print-out format
Table / graph
Doc.: 3109776 Ed.: 01/13.02.2002
PRINT
Online print-out
+
ok Print-out of
start
Particle / NAS / ISO
-
E
ok Online print-out:
start
off/on
+
-
Page 109
ok
start