Items Supplied; Application Restrictions - Hydac FluidControl Unit FCU 8000-1 Série Manuel D'utilisation Et D'entretien

Operating and Maintenance Instruction FCU 8000-1 series

3 Items supplied

The FluidControlUnit FCU is packed and supplied ready-for-operation.
Before commissioning the FCU, please check that all the items have been delivered.
The following items are supplied:
1 off: FluidControl Unit FCU 8110 / FCU 8210
1 off: mains/charging unit
1 off: high pressure hose with Minimess connections 1620, 2000 mm in length
1 off: return line hose DN7, 2000 mm in length
1 off: calibration certificate
1 off: this operating manual

4 Application restrictions

We recommend that the FCU 8110 / FCU 8210 is used only with mineral oils (or
raffinates based on mineral oil). For use with other fluids, please consult our Technical
Sales department.
HYDAC Filtertechnik GmbH
Doc.: 3109776 Ed.: 01/13.02.2002
E
Page 72