Cleaning & Servicing; Disassembly & Storage; Disposal - Heidolph UNIMAX 1010 Mode D'emploi

C.
Repetition
•
Repeating last timer controlled operation does not require new time setting, as long as
you did not touch the master switch.
D.
Edit time during shaking operation
•
Time setting may be changed during shaking, while timer is running and even when timer
controlled operation was discontinued.
•
Memory timer will keep initial value in its memory.
Cleaning: wipe housing clean with a damp cloth (add some sort of mild liquid soap).
Note
To avoid damage to the surface finish, avoid using chlorine bleach, chlorine-
based detergents, abrasive substances, ammonia, rags or cleaning agents
containing metal particles.
The item is maintenance-free. Repair work is limited to technicians so approved or appointed
by Heidolph Instruments. Please call your local Heidolph Instruments Dealer or a Heidolph
Instruments Field Representative (also refer to page 26)
Disassembly
1. Turn item OFF and disconnect mains plug.
2. Remove all of the hardware arranged around the shaker to ease disassembly.
3. Unload all flasks from shaker, uninstall optional equipment.
Forward & Store
1. We recommend storing the item and its components in its original box, or a similar
container that offers adequate protection against transit damage. Tape the box securely.
2. Store the item in a dry place.
Caution
Do not jolt or shake the item during transport.
For disposal, please comply with your local or national regulations.
Split by metal, plastic, etc.
Packing material to be treated as described above (material split).
CLEANING & SERVICING
DISASSEMBLY & STORAGE

DISPOSAL

23
IEI