Cleaning & Servicing - Heidolph UNIMAX 2010 Mode D'emploi

The control panel features the following controls (from right to left): The control panel features the following controls (from right to left):
E
A 2-pole master switch (toggle-type, lighted green) A 2-pole master switch (toggle-type, lighted green)
B continuous / timer-control selector B continuous / timer-control selector
C timer setting knob C timer setting knob
D speed selector knob D speed selector knob
E 3-digit speed display E 3-digit speed display
1. Turn item ON with master switch (A). 1. Turn item ON with master switch (A).
2. Select speed with speed selector (D). 2. Select speed with speed selector (D).
3. Select continuous / timer controlled operation with selector (B) (symbol () or timer 3. Select continuous / timer controlled operation with selector (B) (symbol () or timer
control (timer). In the timer mode, shaking action can be selected between 0 and 120 control (timer). In the timer mode, shaking action can be selected between 0 and 120
minutes; the timer will continue running even in absence of power suppy. minutes; the timer will continue running even in absence of power suppy.
4. Actual speed appears in the 3-digit digital display. 4. Actual speed appears in the 3-digit digital display.
When using shakers inside conditioning cabinets, make reference to
ambient conditions as stipulated in the "Specifications" Section).
Cleaning: wipe housing clean with a damp cloth (add some sort of mild liquid soap).
Note
To avoid damage to the surface finish, avoid using chlorine bleach, chlorine-
based detergents, abrasive substances, ammonia, rags or cleaning agents
containing metal particles.
The item is maintenance-free. Repair work is limited to technicians so approved or appointed
by Heidolph Instruments. Please call your local Heidolph Instruments Dealer or a Heidolph
Instruments Field Representative (also refer to page 29)
D C
CLEANING & SERVICING
25 25
B A
IEI