Duomax 1030 / Polymax 1040; Warranty, Liability & Copyright - Heidolph UNIMAX 1010 Mode D'emploi

Masquer les pouces Voir aussi pour UNIMAX 1010:

Mode d'emploi (16 pages)

Table des Matières

Les langues disponibles

IEI

DUOMAX 1030

shaker frequency

angle

motion type

load-bearing capacity

timer

POLYMAX 1040

shaker frequency

total stroke / orbit

motion type

load-bearing capacity

timer

When running with off-center loads, refer to limitation of load illustrated in the

diagram below.

Load

(kg)

5,0

4,0

3,0

2,0

1,0

0,0

C&G offset (mm)

Warranty

Heidolph Instruments warrants that the present product shall be free from defects in material

(except wear parts) and workmanship for 3 years from the date shipped off the

manufacturer's warehouse.

Damage in transit is excluded from this warranty.

To file for such warranty service, contact Heidolph Instruments (phone ++49-9122-9920-68)

or your local Heidolph Instruments Dealer. If defects in material or workmanship are found,

your item will be repaired or replaced at no charge.

Misuse, abuse, neglect or improper installation are not covered by this warranty.

Alterations to the present warranty need Heidolph Instruments' consent in writing.

Exclusion Clause

Heidolph Instruments cannot be held liable for damage from improper use or misuse.

Remedy for consequential damage is excluded.

Instruments.

2 – 50 1/min (fig. 14)

5° / 10 °

rocking

static: 5 kg, limitations for off-center load

timer 0 – 120 min / continuous

2 – 50 1/min (fig. 14)

5° / 10 °

tumbling

static: 5 kg; static: 5 kg, limitations for off-center load

timer 0 – 120 min / continuous