Changing The Opening Code - Becker Centronic EasyControl EC513 Notice De Montage Et D'utilisation

Changing the opening code

The purpose of the opening code is to carry out actions on programmed re-
ceivers. The programming code is required to change the opening code.
26 - en
Press the "P" button for at least 3 seconds.
▻ The LED flashes slowly.
Enter the programming code (e.g. 1234). The code spe-
cifically preset for the code button is included in delivery
with the product.
▻ The LED flashes slowly.
Now press the "Key" button.
▻ The LED lights up.
You can now enter the new opening code (4 digits).
▻ The LED lights up.
Now press the "Key" button.
▻ The LED goes out.
► The new opening code is saved.