Changing The Opening Code - Becker EC611 Notice De Montage Et D'utilisation

Changing the opening code

The purpose of the opening code is to carry out actions on programmed re-
ceivers. The master code is required to change the opening code.
P
1
Press the "P" button for approx. 1 second.
▻ The blue LED lights up and the green LED
flashes.
Now enter the master code. The master code is spe-
cified in information included with the product.
▻ The blue LED lights up and the green LED
flashes.
Press the "Bell" button.
▻ The blue LED lights up and the green LED
flashes quickly.
You can now enter the new opening code (max. 8 digits).
▻ The blue LED lights up and the green LED
flashes quickly.
Press the "1" button to confirm the new opening code.
▻ The blue LED lights up and the green LED
flashes quickly.
Press the "Bell" button.
▻ The blue LED lights up and the green LED
goes out.
▻ Both LEDs go out.
► The new opening code is saved.
23 - en