Changing The Programming Code - Becker Centronic EasyControl EC513 Notice De Montage Et D'utilisation

Changing the programming code

The purpose of the programming code is to link new receivers to the code but-
ton.
The product is supplied with a preset programming code.
You can change this to a number combination of your own
choice. You will need this programming code if the code but-
ton needs to be reset to factory setting, so please ensure
you keep the current programming code in a safe place for
future reference.
Press the "P" button for at least 3 seconds.
▻ The LED flashes slowly.
Enter the programming code (e.g. 1234). The code spe-
cifically preset for the code button is included in delivery
with the product.
▻ The LED flashes slowly.
Now press the "Key" button.
▻ The LED lights up.
Press the "P" button for at least 3 seconds.
▻ The LED lights up.
You can now enter the new programming code (4 digits).
▻ The LED lights up.
Now press the "Key" button.
▻ The LED goes out.
► The new programming code is saved.
27 - en