Technical Data; What To Do If - Becker Centronic EasyControl EC513 Notice De Montage Et D'utilisation

Rated voltage
Battery type
Degree of protection
Permissible ambient temperature
Maximum emitted transmission output
Radio frequency
The maximum transmitter range on and in the building is up to 25 m, and up to
350 m in the open.
Problem
Drive is not functioning.
Required drive is not functioning.
Opening code forgotten.
Programming code forgotten.

Technical data

What to do if...?

Insert new batteries.
Reduce distance from receiver.
Code button is not programmed in
receiver.
Program the code button.
Enter the correct code (again).
Select correct channel.
Use the programming code to create
a new opening code (see Changing
the opening code [} 26])
Reset the code button to factory set-
ting (see Resetting the code button
[} 28]) and then create a new pro-
gramming code (see Changing the
programming code [} 27])
3 V DC
LR03 (AAA)
IP 54
-15 to +60 °C
≤ 25 mW
868.3 MHz
Remedy
31 - en