Step 5, Size And Cut Duct Piece - Monogram ZV830 Mode D'emploi

5 SIZE AND CUT DUCT PIECE
• Hold upper air deflector
with duct connector
against the ceiling.
• Measure from the bottom
of the air deflector to the
top of the hood as shown.
Reduce that dimension by
"
1 to facilitate installation.
The duct will cover
and overlap the deflector
and the hood outlets.
• Cut the duct piece to size
Deflector
and slip onto the bottom
of the deflector.
• Place the assembled deflector
and duct over the exhaust
outlet.
• Hold the assembly against
the duct bracket.
• Drive 2 screws into each side
of the bottom of the deflector
and into the bracket.
• Use duct tape to seal
duct to the deflector
and at the exhaust outlet.
Installation Instructions
INSTALLATION—RECIRCULATING
Measure Duct
length length
16