Installation Clearances; Optional Duct Cover Accessories - Monogram ZV36SSJSS Instructions D'utilisation

INSTALLATION CLEARANCES

These vent hoods are designed to be installed onto a
wall or beneath a soffit or cabinet.
■ I nstall these hoods* 30" Min. to 36" Max. above the
cooking surface.
■ T hese hoods may be installed 24" min. above a gas
or electric drop-in style cooktop. Always observe
the 30" to 36" clearance when installed over any
professional style cooktop or range.
NOTE: Clearances may vary due to type of
cooking product and local codes. Check with local
inspectors to be sure standard is applicable.
Soffit Installation
In this installation the ductwork running from the top
of the hood will be concealed in the soffit or upper
cabinetry.
Wall Mount Installation
For this installation, a decorative duct cover is
available to conceal the ductwork running from the
top of the hood. Use of the duct cover requires
special consideration to the installation height above
the countertop.
4
Advance Planning
SOFFIT
30" MIN.
36" MAX.
30" MIN.
36" MAX.
OPTIONAL DUCT COVER
ACCESSORIES
Standard decorative duct covers are available in 6"
and 12" heights. Duct covers may be stacked, in
various combinations, to conceal the ductwork running
from the top of the hood to the ceiling.
■ B efore you begin, you should determine the
installation height of the hood and order the
correct size duct cover. The duct covers should
be ordered at the same time as the vent hood and
be on site before installation. Order the duct cover
corresponding to your model.
Standard Duct Covers
6" Duct Covers
Hood Model 6" Duct Cover
ZV48T, ZV48S ZX48DC6
ZV36T, ZV36S ZX36DC6
ZV30T, ZV30S ZX36DC6
12" Duct Covers
Hood Model 12" Duct Cover
ZV48T, ZV48S ZX48DC12
ZV36T, ZV36S ZX36DC12
ZV30T, ZV30S ZX36DC12
6" Duct Cover
12" Duct Cover
Dimensions
6"H x 19-11/16"W x 11-7/8"D
6"H x 15-3/4"W x 11-7/8"D
6"H x 15-3/4"W x 11-7/8"D
Dimensions
12"H x 19-11/16"W x 11-7/8"D
12"H x 15-3/4"W x 11-7/8"D
12"H x 15-3/4"W x 11-7/8"D
1" = 2.5 cm; 1' = 0.3 m
49-80152 Rev. 8