Boost And Power Boost; Cooking-Timer/Alarm - Pelgrim IK2064F Notice D'utilisation

OPERATION

Boost and Power Boost

• The cooking zones are equipped with a 'boost' function. With the 'boost' function you can
cook at the highest power level for a maximum of 1.5 hours. The cooking zone will switche
off automatically once the maximum boost time has passed.
• The cooking zone front left, with the 'P' symbol, is equipped with a 'Power Boost' function.
With this function you can cook for a short period - maximum 5 minutes - at extra high
power level. After this period the cooking zone automatically reduces to level 9.
Switch on (Power) Boost
1. Place the pan in the middle of a cooking zone.
2. Press the on/off button for the cooking zone concerned.
The '0' next to the selected cooking zone will light up clearly.
▷
3. Select power level with the – and + buttons 9.
4. When you select the – button directly, the cooking zone will switch on at power level 9.
5. Directly hereafter press the + button.
▷ Level 'P' will appear in the cooking zone display.
Switch off (Power) Boost
The boost function has been switched on, the display shows level 'P'.
▷
1. Press the button for the activated cooking zone.
2. Directly hereafter press the – button.
▷ The 'P' will disappear from the display and the cooking zone reduces to power level 9.

Cooking-timer/alarm

• A cooking-timer can be set for each cooking zone. The hob also has an alarm. Both the
cooking-timer as well as the alarm can be set for a maximum of 99 minutes.
• The alarm works in the same way as the cooking-timer, but is not linked to a cooking zone.
If the alarm has been set, it will continue counting down after the hob has been switched
off. The alarm can only be switched off when the hob is switched on.
Setting the cooking-timer
1. Select desired cooking zone and set the power level.
2. At the same time press the – and + button.
• The timer setting is displayed in the top two displays (H). The bottom two displays have
been switched off.
• The timer setting is visible for 10 seconds, after which the power setting is displayed.
EN 10