Child Lock; Residual Heat Indicator - Pelgrim IK2064F Notice D'utilisation

OPERATION

Child lock

Child lock activated
1. Press the On/Off button).
The hob is in stand-by mode. The cooking zone displays will
▷
display a '0'.
2. Press simultaneously for a minimum of three seconds the RL cooking zone button and the –
button until you hear a beep.
For a few seconds the cooking zone display will show 'L'.
▷
The child lock is activated.
Child lock deactivated
1. Press the On/Off button.
The cooking zone displays will display 'L' for a few seconds.
▷
2. Press simultaneously for a minimum of three seconds the RL cooking zone button
and the – button.
The cooking zone display will display 'L'. The child lock is de-activated.
▷
Tip
• Set the hob to child lock mode before starting to clean the hob.
This will prevent you switching on the hob by accident.

Residual heat indicator

After intensive use, the cooking zone used may stay hot for several minutes. As long as the
cooking zone is still hot an "H" will flash in
the display.
EN 9