Technical Data - Pelgrim IK2064F Notice D'utilisation

TECHNICAL DATA

This appliance meets all relevant CE guidelines.
Hob type
Induction
Connection
Maximum power cooking zones and diameters
Front left
Rear left
Rear right
Front right
Load
L1
L2
Total connected load
Operate appliance on 1 phase
If your home installation is not fitted with 23 Amp fuses, the appliance's total power consumption
can be limited (power limiter) so that the power consumption doesn't rise above 16 Amp. Not all
zones can be used at full power if the power limiter is activated. The appliance will beep and the
display will flash the set power when the maximum power consumption has been reached.
Setting
1. Within 2 minutes of connecting the appliance to the electric power press all 4 cooking zone
selection buttons simultaneously. Keep these pressed down for at least 3 seconds.
'Hi' will appear in the display.
▷
2. Push the '-' or '+' button and select 'Lo' in the display.
3. Again press all 4 cooking zone selection buttons and keep these pressed for at least
3 seconds.
EN 16
IK2046F / IK2084F
x
220/240-50/60Hz
2000 W / Ø 16 cm
1400 W / Ø 16 cm
2300 W / Ø 20 cm
1400 W / Ø 16 cm
3400 W
3700 W
7100 W