Igniting And Adjusting; Flame Failure Device - Pelgrim GK3104ONY Notice D'utilisation

cONtrOls

Igniting and adjusting

0-setting
High setting
Simmer setting
Burner indication

Flame failure device

GB 8
A symbol near the control knob indicates which burner is being
controlled. The burners can be adjusted continuously between the high
and low positions.
Your gas hob has a flame failure device. This ensures that the gas
supply is shut off if the flame goes out during cooking.
Operating the thermal flame failure device
Press the control knob and turn it anti­clockwise to high setting until
you feel it slightly lock. Then press the control knob deeper and hold
the control knob pressed for approximately 10 seconds after the burner
has ignited.
The flame failure device switches on.
When the burner does not ignite, check whether:
• the burner cap is placed on top of the burner correctly;
• the burner/spark plug is clean and dry.