Igniting And Adjusting - Pelgrim GK410 Notice D'utilisation

controls
49

Igniting and adjusting

Each burner can be adjusted continuously between the full and low positions.
GK410
0-setting
While keeping the knob of the burner held in,
turn the knob to the left and light the burner
full setting
with a match.
low setting
GK415/417/470/472/475/475W/477/477W/478/478W/425/427/428/463
GK465/495/497
0-setting
Press the knob of burner in and turn it
to the left.
full setting
The burner ignites.
low setting
Flame failure device
The flame failure device ensures that the gas supply is closed if the flame goes
out during the cooking process.
Hold the control knob pressed in in the full position for approximately
5 seconds.
The flame failure device will switch on.