Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
- Setting ring tones and signal tones -
8.2
Setting up ring tones for the base station
Press the MENU display button, choose SOUNDS by means of the navigation
keys and confirm with OK.
Select BASE with the navigation keys and confirm with OK.
The volume of the ring tone can be adjusted in five steps in the first line of the
display using the left and right navigation keys. When CRESCENDO is selected,
the ring tone starts quietly and becomes louder with each ring. If at any time you
do not want to be disturbed, you can also turn off the ring tone on the base station
altogether.
Now use the navigation keys to move to the second line of the display and then
select the required ring tone.
Confirm with OK.
Press the
items from the menu.
8.3
Activating/deactivating the button tone
Each time a button is pressed, the mobile unit confirms with a button tone. The button
tone can be switched on or off.
Press the MENU display button, choose SOUNDS by means of the navigation
keys and confirm with OK.
Select HS KEY TONES with the navigation keys and confirm with OK.
Now select whether you want to activate or deactivate the function by using the
navigation keys and confirm with OK.
Press the
items from the menu.
8.4
Activating/deactivating warning tones
A short tune will sound when the phone is placed on the base station or a save
operation has been successfully completed. This tune can be switched on or off.
Press the MENU display button, choose SOUNDS by means of the navigation
keys and confirm with OK.
Select HS TONES with the navigation keys and confirm with OK.
Now select whether you want to activate or deactivate the function by using the
navigation keys and confirm with OK.
Press the
items from the menu.
button to return to the main display immediately or choose other
button to return to the main display immediately or choose other
button to return to the main display immediately or choose other
127
Publicité
Chapitres
Table des Matières
