Timer; Integral Stopwatch - switel CD728 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Calling between mobile units.
Press the TALK display button on one mobile unit.
Select the mobile unit you that you want to call and press OK.
A ring tone will sound on the selected mobile unit. The call can be accepted there
with the call button
another. The call is terminated on both mobile units with the
Switching off walkie-talkie mode
To cancel the function, press the CANCEL display button and then OK on all mobile
units concerned. The mobile units will be logged on to the base station once more.
6.4

Timer

You can use the integral timer to be reminded of an appointment or the like after a
certain time.
Press the MENU display button, select EXTRAS with the cursor and confirm with
the OK display button.
Select the TIMER setting and press the OK display button.
Enter how long the timer is to run in hours, minutes and seconds in the three lines
and confirm with OK. The timer will be switched on and the remaining time will be
indicated in the display.
When the timer has run down to zero, you will hear an alarm tone for one minute. The
alarm can be cancelled prematurely by pressing the STOP display button.
6.5

Integral stopwatch

You can measure times with a resolution of 1/10 of a second using the integral
stopwatch.
Press the MENU display button, select EXTRAS with the cursor and confirm with
the OK display button.
Select the STOPWATCH setting and press the OK display button.
The stopwatch will start to run when the START display button is pressed.
When the stopwatch is running, an intermediate time can be read with
o
PAUSE. The time is resumed by pressing RESUME.
The time is stopped by means of the STOP button.
o
The stopwatch is reset to zero with RESET.
o
Press the
CANCEL to select other items from the menu.
122
- Extras -
and the two mobile units will be able to speak to one
button to return immediately to the main display or choose
button.

Publicité

Table des Matières
loading

Table des Matières