10 System
System
10.1
Logging on mobile units
Before you can use additional mobile units, these must first be logged on. You will find
further information on using additional mobile units in Chapter 11.
10.2
Automatic base unit selection
If a mobile unit is logged on to several base stations, you can choose here the base
station that the mobile unit is currently connected to. In the AUTO setting, the mobile
unit will automatically search for the nearest base station. When reception is no longer
adequate, the mobile unit will then search for the other base stations, which it is logged
on to.
Press the MENU display button, choose SYSTEM by means of the navigation keys
and confirm with OK.
Select BASE SELECT with the navigation keys and confirm with OK.
Use the navigation keys to select which base station the mobile unit is to be
connected to. For automatic base station selection, choose AUTO.
Confirm with OK.
Press the
items from the menu.
General information on using additional base stations: You can increase the range
of the mobile units by using several base stations. To make use of this effect, all base
stations must have a telephone connection and the mobile unit must be logged on to all
base stations used. Depending upon the application, you can allocate the same
telephone number to each base station or you can give the base stations different
numbers. In this case, the mobile unit will always be given a new phone number as
soon as it is within range of a different base station. Make sure that the ranges of all
base stations overlap. Please test the range of the mobile units before putting a new
base station into operation. If a mobile unit is logged on to the base station and if the
automatic base station selection is activated, the mobile unit is always forwarded
automatically to the nearest base station. Current calls cannot be transferred from
one base station to another.
10.3
Logging off mobile units
When several mobile units are used, any mobile unit can be logged off again here. You
will find further information on using additional mobile units in Chapter 11.
132
- System -
Register
Base Select
Delete HS
Change PIN
Reset
button to return to the main display immediately or choose other