Installation And Adjustment; Tools; Manner Of Delivery; Adjusting The Steering Unit - Vermeiren Eris Manuel D'utilisation

3

Installation and adjustment

The instructions in this chapter are for the user and the specialist dealer.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility. A list of
Vermeiren facilities can be found on the last page.
L
WARNING
: Risk of unsafe settings - Use only the settings described in this manual.
L
WARNING
: Risk of tipping over - Variation allowed adjustments can still change the
stability of your scooter (tilt back or sideways).
3.1

Tools

To set up the scooter the following tools are needed:

Wrench set n° 13, 17

Allen keyset n° 6
3.2

Manner of delivery

The scooter shall be delivered with:

Frame with armrests, steering unit, rear and front wheels

Footplate

Seat + backrest

Batteries (2x), motor

Basket

Rear view mirrors (2x)

Parking brake

Battery charger

Accessories

Manual
3.3

Adjusting the steering unit

The steering unit can be adjusted in many different positions (stepless) to suit each driver. The tiller
angle (A) is adjustable between 0° (horizontal, without seat) and 80° (top position).
L
WARNING
: Risk of injury - Never adjust the angle while you are driving.
L
WARNING
: Risk of injury - Turn the scooter off before you adjust the angle of the
steering unit.
L
WARNING
: Risk of injury - Do not lean with your whole body on the steering unit.

1. Push the lever downwards.
2. Adjust the steering unit in the desired position.

3. Release the lever .
Page 19
Eris
2019-03