Installation And Adjustment; Tools; Manner Of Delivery; Adjusting The Footrests - Vermeiren Bobby Manuel D'utilisation

4

Installation and adjustment

The instructions in this chapter are for the specialist dealer.
The Vermeiren Bobby has been designed for short trips and easy transfer.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
WARNING
 Use only the settings described in this manual.
 Variation of allowed adjustments can still change the stability of your wheelchair (tilt back or
sideways).
4.1

Tools

To set up the wheelchair the following tools are needed.
 Wrench set n° 10
 Allen key set n° 4
 Screwdriver Phillips head
4.2

Manner of delivery

The Vermeiren Bobby shall be delivered with:
 1 frame with armrests, rear and front wheels
 1 pair footrests
 Tools
 Manual
 Accessories (optional)
4.3

Adjusting the footrests

CAUTION
Adjust the length of the footrests as follow (3 holes on inside tube, 3
holes on outside tube ; 120mm range):
1. Remove the screw (1).
2. Adjust the length of the footrest to a comfortable length.
3. Tighten the screw (1) properly.
Risk of injuries and damage
Risk of damage – Avoid that the footrests make any contact with the ground.
Keep a minimum distance from 60 mm above the ground.
9
Bobby
2022-07
Installation and adjustment
EN
NL