Accessories - Vermeiren Eris Manuel D'utilisation

Brand
Address
Type
Maximum occupant mass
Model
Description
Nominal voltage (battery)
Degree of protection
Battery charger
USB connection
Battery charger protection class
Battery charger insulation class
Minimum turning diameter
Reversing width
Diameter rear wheels (number)
Tyre pressure, rear (driving) wheels
Diameter steering wheels (number)
Tyre pressure, steering wheels
Handle bar
Lights
Indicator light
Mirrors
Storage and use temperature
Operating temperature of the
electronics
Storage and use humidity
Tested and meets requirements of
Resistance to ignition acc. to
We reserve the right to introduce technical changes. Measurement tolerance ± 15 mm / 1,5 kg / 1,5°.
* The theoretical driving distance will be reduced if the scooter is used frequently on slopes, rough
ground or to climb curbs. Maximum driving distance is tested according ISO 7176-4 under ideal
circumstances.
1.4

Accessories

The following accessories are available for the scooters Eris:
L
WARNING:
Risk of injury - Be sure that crutches are attached very well and
cannot fall on the user.

Crutch holder

Scooterpac

Topcase

Rollator holder
Vermeiren
Vermeirenplein 1/15, B-2920 Kalmthout
Rear wheel drive scooters, Class B
140 kg
6 Amp (external)
Table 1: Technical specifications
Page 6
Eris
Dimensions
2 x 12V
IPX4
8 Amp (external)
No
IPx1
II
2900 mm
2900 mm
3.00-4 air (2)
Max. 3,5 bar
3.00-4 air (2)
Max. 3,5 bar
Speed control lever
Serial
Serial
Optional
+5 °C to +40 °C
-10°C to +40°C
30%
ISO 7176-14:2008
EN1021-2
Eris
2019-03