EN – Original instructions
I. Parts List
II. Characteristics
I. PARTS LIST
II. CHARACTERISTICS See table 1
III. SAFETY INSTRUCTIONS
WARNING Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious
injury.
Before using this product, carefully read this manual and familiarise yourself with its content and
understand all safety instructions.
Do not operate or service the product unless you clearly understa nd this manual.
Always follow the safety instructions to minimize risk of damage to property, and to minimize any
risk of damages and injuries to yourself and other persons and/or animals.
Save all warnings and instructions for future reference.
Keep the manual with the product or in a safe place, so that you can read it whenever you have a
question about its use or servicing.
Please give the safety instructions booklet to any person likely to work with the machine.
Transfer the user manual to any person when you loan or sale the product.
3.1- Symbols (Explanation of symbols appearing on the tool, if applicable)
Caution! Risk of injury and/or damage and/or deterioration of product in case of non-
compliance to safety requirements.
Understand your log splitter
Read the instructions manual.
Read and understand the manual and labels affixed to the log splitter.
Learn its application and limitations as well as the specific potential hazards peculiar
to it.
Make sure all users read the instructions.
Operators need to receive necessary training and instruction before operating the
product.
Never permit a person without training or proper instruction to operate this machine.
Keep this manual handy for future reference
Wear protective equipment
- Wear eye protection! Protect your eyes and face
Any log splitter may throw foreign objects into the air.
Flying debris can cause permanent eye damage or face & head injury.
Always wear protective face shield or safety goggles and helmet.
Note: everyday eyeglasses have only impact resistant lenses. They are not safety
glasses.
- Wear protective gloves!
- Wear safety footwear!
Protective electrically non-conductive gloves and non-skid footwear / protective
boots are recommended when working.
III. Safety instructions
IV. Getting Started
See Fig.1
V. Operation
VI. Maintenance and Storage
Page 24 / 64