Parts List; Safety Instructions - Ribimex RIBILAND PREHLS11T V 043091 Manuel D'instructions

EN – Original instructions
I. Parts List
II. Characteristics
I. PARTS LIST
SEE FIG.1
II. CHARACTERISTICS
SEE TABLE 1
III. SAFETY INSTRUCTIONS
Before using this product, carefully read this manual and familiarise yourself with its content and
understand all safety instructions.
Do not operate or service the product unless you clearly understand this manual.
Always follow the safety instructions to minimize risk of damage to property, and to minimize any
risk of damages and injuries to yourself and other persons and/or animals.
Keep the manual with the product or in a safe place, so that you can read it whenever you have a
question about its use or servicing.
Please give the safety instructions booklet to any person likely to work with the machine.
Transfer the user manual to any person when you loan or sale the product.
3.1- Symbols (explanation of symbols)
Caution! Risk of injury and/or damage and/or deterioration of product in case of
non-compliance to safety requirements.
Understand your log splitter
Read the instructions manual.
Read and understand the manual and labels affixed to the log splitter.
Learn its application and limitations as well as the specific potential hazards
peculiar to it.
Make sure all users read the instructions.
Operators need to receive necessary training and instruction before operating the
product.
Never permit a person without training or proper instruction to operate this machine.
Keep this manual handy for future reference
Warning! Electrical hazard. Risk of electric shock.
Do not expose to or use in weather conditions (ex.: storm, rain, snow ...), moisture.
Do not use in damp or wet areas.
The machine must NOT be sprayed with water (danger due to the presence of
electric current).
Do not operate the unit outdoors when it is raining.
Avoid dangerous conditions
Always operate your log splitter on dry, solid, level ground.
Never operate your log splitter on slippery, wet, muddy, or icy surfaces.
The location you choose should be free from any tall grass, brush, or other
interferences.
There should be plenty of room for handling, and help the operator stay alert.
To avoid tripping, do not leave tools, logs, or other components laying around the
work area.
Do not use it in areas where fumes from paint, solvents or flammable liquids pose a
III. Safety instructions
IV. Getting Started
V. Operation
VI. Maintenance and Storage
Page 19 / 51