Ribimex PREHLS8T/VN1 Manuel D'instructions Et D'utilisation page 30

sharp edges. Do not pull the cable to remove the plug from the socket.
- Check extension cable regularly and replace it as soon as you notice any damage.
- Never use a defective supply cable / extension cord.
- Use only extension cords approved for outdoors use, if necessary.
- Never use provisional electrical connections.
- Do not bypass safety equipment and never switch them off.
- All electrical connections or repairs on electrical parts of the machine must be carried out by a
certified electrician or an authorised service centre. Local regulations, particularly regarding
protective measures must be observed.
- Repairs to other parts of the machine must be performed by the manufacturer or an authorised
service centre.
- Only use original spare parts or accessories. The use of other parts and other accessories may cause
risk of injury to the user and releases the manufacturer's liability for any damage incurred.
3.3- Safety instructions specific to log splitters
- Wear suitable clothing and personal protective equipment (PPE): suitable personal protective
equipment including safety footwear, close fitting clothing and suitable work gloves, eye protection
and hearing protection.
- Should you be unfamiliar with the proper use of the machine, we recommend you receive the
appropriate training and instruction, (if deemed necessarily follow a practical course for operating,
servicing and maintaining the machine safely).
- The splitting operation of the machine is designed to be activated by one person only.
When the possibility of additional operators could be working near the machine (e.g. for loading
and unloading), remember that only one operator should activate the splitting operations.
- The machine MUST NOT be used by children;
- Perform tests of the machine's safety devices prior to use.
- Before starting work, inspect hydraulic pipes and hoses
- Before starting work, inspect and test stopping devices;
- Select and prepare a suitable working area free from obstructions, such as logs, split wood ...etc.
- Cut wood and wood chips create a dangerous work area. There is a risk of tripping, slipping or
falling. Therefore, keep your work area clean and tidy.
- Stop the machine and disconnect it from the power source before cleaning or making adjustments;
- Do not leave the machine unattended when running.
- Beware of hazards arising from characteristics of wood when being split (e.g. knots, logs of
irregular shape, etc.) causing projectiles, jamming, crushing, etc.
- Do not reach into the splitting zone. Never put your hands on the moving parts when the machine
is switched on! Never use your hands to clear or remove a jammed log!
- Electrically driven log splitters must use a portable residual current device (PRCD) if a residual
current device (RCD) with a maximum residual current of 0,03A is not provided in the electrical
system!
- Use a log holding device.
Page 30 / 64