Getting Started - Ribimex PREHLS8T/VN1 Manuel D'instructions Et D'utilisation

IV. GETTING STARTED
Before assembly or intervention on product, ensure that switch is set on the "OFF"
position and disconnect from power source.
4.1- Unpacking
- We recommend that at least two adults to unpack the log splitter
package.
- Remove product from its packaging.
- Check that product and accessories are not damaged.
- Remove the bolts (M8*20) and packaging supporting part.
4.2- Assembly
- For packing reasons, the machine is not completely assembled and therefore requires some
assembly from the user.
Wheels assembly
- Insert wheel axle (A) through the holes.
- Then, mount a wheel (C) on each side of the axle and
secure with a cotter pin (B).
- Slightly bend the cotter pin to prevent it from falling
out.
Page 31 / 64