Ribimex PREHLS8T/VN1 Manuel D'instructions Et D'utilisation page 32

Operation handles assembly
- Position LEFT operation handle as illustrated.
- Fix the handle tube (A) on the guard board (G) with bolt
(D) and nut (C).
- Fix the hoop guard (E) on the guard board with screws
(F).
- Repeat above assembly to the RIGHT handle.
- Make sure all nuts and screws are tightened after
assembly.
Mounting the operation handles assembly
- Insert the assembly in the lever (D), then fix it in place
with hexagon bolt (B) and self-lock nut (C).
- Tighten the nut.
- Repeat above assembly to the RIGHT assembly.
- Make sure all nuts and bolts are tightened after
assembly.
Page 32 / 64