Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Contents
1.
Introduction
2.
Safety Instructions
2.1
General Safety Instructions
2.2
3.
3.1
3.2
3.3
4.
4.1
5.
6.
6.1
6.2
6.3
7.
7.1
7.2
7.3
Operating Instructions for Punching with Separate Wiper
7.4
7.5
7.6
Operating Instructions for Working with Length Stops
7.7
7.8
8.
9.
10.
11.
12.
13.
Pay particular attention to underlined, bold text or positions marked with warning
signs in this manual!
1. Introduction
Thanks for purchasing the AlCu-Press type 2605.
These instructions are an integral part of the machine / tool.
These instructions are constantly reviewed and updated if necessary (subject to technical changes) -
see http://www.haewa.com/dialog-contact/download-center.html
Please treat this document with care and make sure that it is read, understood and followed by all operating personnel.
This operation manual must be readily available during the entire service lifetime of the device.
If you still have questions about the machine or its function after reading this manual, please contact your local sales office or häwa directly.
2. Safety Instructions
2.1 General Safety Instructions
Machinery / tools with moving parts always carry a risk of injury and require specific caution and care.
Please read this manual carefully before operating this machine / tool to minimize risks.
•
This device may only be operated in proper functioning condition.
•
Any kind of modifications must be reported immediately to the supervisor.
•
Keep the work environment tidy.
•
Make sure that the working area is well-lit.
•
Secure long and heavy work pieces against falling during operation.
•
Clean up possible oil leakages immediately.
•
Operating personnel is obliged to wear suitable protective clothing (e.g.: gloves, anti-slip work shoes, close-fitting clothes, ear protectors, safety
glasses).
•
Work at the machine is prohibited if concentration could be affected (e.g.: through the consumption of drugs and alcohol).
•
No other persons apart from the operator may stay in the direct working area during operation.
13
Publicité
Chapitres
Table des Matières
