Line Out Connection; More Features; Active/De-Active Timer Function (By Remote Control) - SOUNDMASTER PL905 Mode D'emploi

B) if the system cannot return to rest position automatically after playback of record
2) use a cross head screw driver and turning the alignment screw (26) inside the hole anti-clockwise, the stopping and eject
position of the tone arm will move more away from the center of the record before playback completion.
Remark:-
The stopping position is very subjective among difference customer, please select the most suitable position based on
-
your own record collection. The ex-factory setting is based on the most common template.
Please check the stopping position time by time during adjustment and avoid over turning of the screw inside.
-

Line out connection

You can connect the system to your whole hi-fi system by connecting the line out socket (32) to the auxiliary input socket with
a RCA cable (not included).

More features

A. Sleep setting (by remote control)
The sleep function enables the system switch to standby mode automatically at a present time.
1. Press "sleep/timer" button and sleep indicator "
2. Keep pressing the button to adjust the sleep timer in the order of slp 90 > 75 >60 > 45 > 30 > 10 minutes.
3. System will stop and goto standby mode automatically after the selected timing.
4. To cancel the sleep mode, press "timer/sleep" button until " off " is display on LCD & the "
B. Alarm clock setting (by remote control)
This function allows the system to turn on automatically and wake you up by Tuner, USB mode respectively.
First, set the unit at standby mode and then press & hold the " Timer " button to enter the setting mode, the LCD display will
flashing with the first digit.
1) Wake up time : press skip up
Then minutes digit will flashing, press skip up
button to store the timer on time. Then display will flash "TUN"
2) Wake up source : press skip up
To confirm the setting.
Remark
 The unit will switch off automatically after setting the alarm. The wake up volume is preset at level 18.
 If there is no music source being detected (such as USB) when the preset time is reached, system will default to tuner
mode automatically.
 For tuner wake up, the system will preset at the latest radio frequency being listened before switching off.
 Please switch off the system manually during alarm wake up mode as the system will not turn off automatically after
alarm on mode.
 Active/de-active timer function (by remote control)
1. To active the alarm, press once the " timer " button on remote handset until the timer indicator "
display.
2. To cancel alarm function by press once again " timer " button until the timer indicator "
C. Pre-set EQ function
This unit provides 5 differences sound mode to enhance your listening experience. You can select the desired effect by
pressing the preset EQ button repeatedly at following sequence:-
Flat pop
Remark : Due to ErP stage two requirement and to protect the environment, the unit will
switch to standby mode automatically once no any music playing over 15 minutes.
z
z " shown on the LCD display.
z
/ down " button to set the hour & then press Timer again to confirm the hour.
/ down " button to select the timer on mode, then press the Timer button
jazz rock
/ down " button to set minute and press Timer
classic
24
z
z " indicator disappear.
z
" is shown on LCD
" disappear.