Stop Mode - SOUNDMASTER PL905 Mode D'emploi

Remark : The working pressure of the provided stylus is from the range 4 – 6 grams. According to the cartridge manufacturer.
All stylus has it own working pressure and please refer to the specification respectively.
Connection
Connect the AC line cord (34) to AC outlet.
1.
Press the Power/Function button (4) and if standby LCD display light on, it's mean the power supply is normal. Now your
2.
system is ready to play the music.
Setting the clock (By remote control)
1. Set unit in standby mode.
2. Press & hold the "MEM/CLK-ADJ" button (44) of the remote control, the LCD display will show " 24 hr "press TUNE
or TUNE button (16/44) to select the appropriate area hour format (12hr/24hr). Press "MEM/CLK-ADJ" button (44)
again to confirm.
3. The LCD (3) will display the first & second digit of " 00 " is flashing. Press TUNE
the correct hour. Press "MEM/CLK-ADJ" button (44) to store the correct hour.
4. The third & fourth digit of " 00 " is flashing, press the TUNE
Then press " MEM/CLK-ADJ " to store the correct minute.

The pre-set time will be re-set completely if dis-connecting the main power supply. You are
recommended to switch the system into standby mode for convenience usage.
Listening to radio
Manual tuning
1. Press the Power/Function button (4) to switch on the unit and rotate the Power/Function button (4) to select " Tuner
" mode.
2. Press and hold the TUNE
3. The unit will start seeking automatically and stop until a radio station is reached.
4. Repeat step 2 & 3 until the desired radio station is being reached.
5. Adjust volume up/down (9/42) button to the desired volume level.
Preset stations (by remote control)
You can store up to total of 30 radio stations in the memory.
1. Set to " Tuner " mode
2. Turn to the desired radio station by "manual" tuning method.
3. Press " MEM/CLK-ADJ " (44) at remote handset button to enable program state.
4. Press " FOLDER/PRE (44) or FOLDER/PRE
position for storage.
5. Press "MEM/CLK-ADJ" button (44) again to confirm the setting.
6. Repeat step 2 to 5 to store other stations.
7. Press FOLDER/PRE (44) or FOLDER/PRE

THE PRE-SET MEMORIES WILL BE CANCELLED COMPLETELY IF SWITCHING OFF THE MAIN POWER
BUTTON ON SYSTEM. YOU ARE RECOMMENDED TO SWITCH THE SYSTEM INTO STANDBY MODE FOR
CONVENIENCE USAGE.
 YOU CAN OVERWRITE A PRESET STATION BY STORING ANOTHER FREQUENCY IN ITS PLACE.
FM & FM-stereo reception
 System defaulted in stereo mode. The FM-stereo icon "ST" will light up on LCD display (3) show FM stereo program is
receiving. In particular when stereo signal are weak. It is preferable to receive the program in mono by ST/MP button on
remote control.
Hints for best reception:-
- FM : The receiver has a built-in FM wire antenna hanging at the rear cabinet. This wire should be totally unraveled and
extended for best reception.
Playing compact disc
 Getting start
1. Press the Power/Function button (4) to switch on the unit and rotate the Power/Function button (4) to select " CD " mode.
The LCD display will show " busy " and then " no disc " if the CD compartment is empty.
2. Then press the CD tray open button (6) to open the CD tray (7).
3. Place a CD with the printed side facing up inside the tray & then close the CD door.
4. Focus search is performing and LCD display (3) will show " busy " and then display the total number of tracks & total
playing time.
 Play / Pause mode
1. Press the " CD Play/Pause
2.
To interrupt, press the " Play/Pause
again to resume normal playback.
 Stop mode
1. If " CD Stop " button (19/38) is pressed during play or pause mode. It will go to stop mode and display total number of
track on the LCD display (3).
or TUNE button (16/44) for 1-2 seconds and then release
button to select the preset stations in order.
" button (13/36) to start playback, the first track will start playback.
" button (13/36)once, the playing time will be freeze on the LCD display (3). Press
or TUNE
button at remote handset to select the desired station memory
18
or TUNE button (16/44) to set
button (16/44) to set the correct minutes.