SOUNDMASTER PL905 Mode D'emploi page 22

1． Select CD function mode and place the CD-R(W) disc you are going to finalize.
2． Press the finalize button during CD stop mode. " Fin-d " appears on the LCD display (3) (press the " CD stop
(11/38) to quite finalize mode if necessary)
3． Press the " Play/Pause
4． After completion, the CD door will open automatically and the " NO TOC " indicator will disappear from LCD (3).
Remark:-
- The time for finalizing is subject to the contents of recorded and it may take up to 15 minutes in some cases.
- No button is working during finalize process.
- Never turn off the power or un-plug the power cord during finalize process.
- The CD-R disc cannot be recorded again after finalizing.
- Although finalized CD-R disc may be played on ordinary CD players, remember that finalized CD-RW disc may not play
on ordinary CD players.
-
Owing to the variance of the compatibility of CD-R or CD-RW disc from the market. Please change to other one if
the recording cannot perform or you find the recording performance of existing one is not up to satisfaction.
This is not the malfunction of the system.
IV) Erase or un finalize a CD-RW disc
It is possible to erase the last recorded track or erase a whole record disc.
If erase the last track of the finalized CD-RW, must un finalized the CD-RW first
A) Un finalize a CD-RW disc
1. Set at CD function mode and place the CD-RW disc you would like to un finalize.
2. Press the " Erase " button (43) on remote handset at CD stop mode & display will show "un Fin-d" then press the " CD
Play/Pause " button (13/36) to start erasing and " busy " disappear on the LCD (3).
3. After finish the un finalized display will show total track nr. and total playing time of the disc and " NO TOC" indicator will
appear
B) Erase one track
4. Set at CD function mode and place the un finalized CD-RW disc you would like to delete the track.
5. Press the " Erase " button (43) at CD stop mode & "Er" and the last track nr. appear on the LCD (3)
6. Press the " CD Play/Pause
7. After finish the track erasing display will show total track nr. and total playing time of the disc and " NO TOC " indicator will
appear
8. Repeat step 5 and 7 to continue the erasing.
C) Erase all track
1. Set at CD function mode and place the CD-RW disc you would like to delete the track.
2. Press the " Erase " button (43) at CD stop mode repeatedly until " Er all " appear on the LCD (3)
3. Press the " CD Play/Pause
4. The LCD (3) will show " 0000000 " to confirm the erase process is completed.
Remark :
- This operation cannot be undo.
- The copy CD-RW disc from other system cannot be erase one by one in this unit but may be erase all is possible.
Playback of MP3 song via USB storage media
Connecting
The system is able to decode and playback all MP3 file which stored in the memory media with USB connecting port.
1. Set the system at standby mode first or other function except USB mode.
2. Plug-in the USB pen-drive with the face up & make sure it going into completely or insert the memory card in the direction
of the arrow as shown in the label on the underside of the memory card slot. Insert straight without bending..

Connecting the USB upside down or backwards could damage the audio system. Check to be sure the direction
is correct before connection.
3. Press Functions button to select "
4. The system will start reading the storage media automatically after connecting, and LCD display (3) will show the total
number of MP3 files being detected.
 Play / pause mode
1. To interrupt, press the USB "
Press again to resume normal playback.
 Stop mode
1. Press and the USB stop
 Skip mode (skip up
1. During play or pause mode, if "USB skip up
And then remain the play or pause mode.
2. During play or pause mode, if "USB skip down
play mode.
" button (13/36) to start finalizing and the LCD (3) will show " busy " during the process.
" button (13/36) to start erasing the last track and " busy " disappear on the LCD (3).
" button (13/36) to start erasing and display appear "busy" during erasing
" USB mode.
" button once (17), and the playing time will be freeze & flashing on the LCD display (3).
button (44) during play or pause mode, system will go to stop mode.
/ skip down )
" button (16/44) is pressed. It will go to next track and display the track no.
" button (16/44) is pressed. It will go to the previous track and change to
21
" button