Attaching/Removing The Cleaning Head - Cleanmaxx JJ-SC-005B Mode D'emploi

Attaching/removing the cleaning head

2. Insert the handle end piece (C) in the handle bar (B). If appli-
cable, depress the catch on the handle end piece so that it fi ts
into the handle bar. The catch must lock into the handle bar
opening. Turn the handle back and forth for this.
3. Insert the end of the handle bar in the top opening of the main
unit (A).The handle bar must audibly lock into place. To remove
the handle bar depress the release button (14) and pull the
handle bar out at the same time.
4. Turn the top hook for winding up the cord (2) up and the bot-
tom one down and wind the power cord around both hooks.
In order to quickly unwind the power cord again, turn the top
hook of the cord spool down.
• Insert the end piece of the cleaning head (L) in the steam nozz-
le (9) of the main unit until the catch locks into the opening next
to the steam nozzle.
• To remove the cleaning head, depress the catch and pull the
cleaning head out at the same time.
22