Appendix B: Function Tree - LUXSAR VDRPJ10 Manuel D'utilisation

Appendix B: Function Tree

System Function Tree
Function
System Setting
Lock the keypad
1. System Linking
2. Set Keyboard ID
3. System Monitor
4. RS-232 Baud-rate
setting
5. Date Setting
6. Time Setting
7. System D/T
Correction
8. System Alarm List
9. Camera Type &
Speed
10. Key Press Beep
11. Alarm Reaction
12. Password Setting
Dome Camera Control Mode
Function
Dome Selection
Pan/Tilt
Lens Control
Set Preset
Call Preset
Set Sequence
Call Sequence
Build and Run
Auto-Pan
Build and Run Cruise <CRUISE>
OSD Open
User's manual VDRPJ10 Version 2.3
Operation
Press <SYS> key
Press <KEYLOCK> key
Use ◄ ► key to Select
(2400/4800/9600)
Press <1> to assign the
camera's protocol and <2>
to select system baud rate
Use ◄ ► key to Turn
ON/OFF
Use ◄ ► key to Turn
ON/OFF
Operation
+ <1> ~ <223>
Joystick
<Zoom Wide>
<Zoom Tele>
<Focus Near>
<Focus Far>
<Auto/Focus>
<Brightness +>
<Brightness ->
<1> ~ <128> + <Set Preset> Record preset points
<1> ~ <128> + <Go Preset> Recall preset points
<1> ~ <8> + <SET SEQ>
<1> ~ <8> + <Run SEQ>
<AUTO PAN>
<Camera Menu>
Description
CCTV System Setting Mode
Lock/Unlock keyboard
Scan the existed device
Keyboard ID Setting
MPX, Supper MMX and Supper MPX
Date setting : Year, Month, Day
(3-axis keyboard only)
Time setting : Hours, Minute, Second
(3-axis keyboard only)
System Date/Time Correction
(3-axis keyboard only)
Record the Latest 10 Alarm Information
Set New Password
Description
Press number keys to select a dome
camera to control.
Right/Left for PAN, Up/Down for Tilt
Zoom Out
Zoom In
Focus Near
Focus Far
Auto-Focus
Brightness Up
Brightness Down
Record sequence lines
Execute Sequence
Record and execute the auto-pan line
Build and execute the cruise path
Press this button for 3 seconds to open the
camera OSD menu.
33