Setting Through Keyboard - LUXSAR VDRPJ10 Manuel D'utilisation

6.5.1

Setting through Keyboard

Set Auto-Pan Line
(1) Press <Auto Pan> to enter Auto-Pan mode. The LCD on the
VDRPJ10 will display «1.RUN 2.SETTING». Press <2> to start
configuring Auto-Pan parameters.
(2)
(3)
User's manual VDRPJ10 Version 2.3
001 P/T/Z/F/OSD Cam
[003] [15] [002]
Move the dome camera to a specific position and press <ENTER>
to save it as the start position of a scan region (see the column 3.1
below); pan the dome camera to another position and press
<ENTER> to save it as the end position of scan region (see the
column of 3.2 below).
3.1 AutoPan Setting
ENTER for Start Pos.
3.2 AutoPan Setting
ENTER for End Pos.
Select the scan direction and Auto-Pan speed using direction keys
(see the columns 3.3 and 3.4 below), and then press <ENTER> to
confirm the selection for each item.
3.3 Pan Direction
RIGHT/LEFT
3.3 AutoPan Setting
Speed (1-4): _
Luxsar
23