Joystick; Preset Function; Setting Through Keyboard - LUXSAR VDRPJ10 Manuel D'utilisation

NOTE: In the dome camera's OSD, the key <CAMERA MENU>
functions as "ENTER" and "Exit."
6.2

Joystick

Push the joystick right/left/up/down to Pan/Tilt/Zoom the dome camera directly.
Please also refer to section 6.1 for other function of the joystick when using the
camera with Pelco Protocol.
6.3

Preset Function

Under the Camera Control mode, users are allowed to operate the preset
function. Please follow the instructions to set and run preset positions either
through the
6.3.1

Setting through Keyboard

xxx P/T/Z/F/OSD Cam
___
Set Preset Positions
Up to 128 preset positions could be set through the keyboard. Press a
number key, such as <2>, for a view area, and then press <SET PRESET>
(see the diagram below) to record this position as preset point 2.
xxx P/T/Z/F/OSD Cam
___
User's manual VDRPJ10 Version 2.3
Luxsar VDRPJ10 or the camera OSD Menu.
17