Overview - LUXSAR VDRPJ10 Manuel D'utilisation

1.

Overview

This Luxsar
easily, such as Digital Video Recorders (DVR), cameras and other CCTV
devices with RS-485 interface for remote control and system configuration. Back
lit LCD display and 3-axis joystick control provide user- friendly operations.
Built-in firmware upgrade circuits allow users to upgrade firmware through the
RS-232 port.
The system configuration diagram below shows the application of the
VDRPJ10 in a comprehensive surveillance system.
NOTE: To extend the network distance up to 1.2 km (4000 feet) and to
protect the connected devices, it is highly recommended to place a
repeater in the mid-point. However, a repeater may be needed in the network
distance less than 1.2 km if the used cables are not the CAT 5, 24-gauge cables.
User's manual VDRPJ10 Version 2.3
VDRPJ10 can be integrated with a full range of CCTV products
Luxsar
4