Dvr Control; Mode Function; Freeze Function - LUXSAR VDRPJ10 Manuel D'utilisation

7.

DVR Control

Users are able to control Multiplexers/DVRs remotely through the control
VDRPJ10. Press the <Multiplexer/DVR Mode>
Multiplexer/DVR control mode; the LED of the key would be lightening. Then
input the ID number of Multiplexer/DVR and press the <ENTER> key to confirm
your input.
Multiplexer/DVR Mode
Select MPX (1-14):01
Multiplexer/DVR: 01
CH: xx
Under this mode, users can input the channel number for a full-screen display
(see the columns above) and other Multiplexer/DVR control functions, which will
be described in the following sections. For further details, please refer to
documentation of the Multiplexer/DVR.
7.1

Mode Function

Press repeatedly to select a mode of main monitor display; there are 4 available
view modes: full screen, 4-window (2×2), 9-window (3×3) and 16-window (4×4).
7.2

Freeze Function

If press either the key <FREEZE> or <CRUISE> (PAUSE/DEL) while viewing live
image, the real-time recording will be paused. To restore to the live mode, simply
press the key <FREEZE>/<CRUISE> again. Additionally, If press one of the keys
during playback, the playing will be paused; press the same key again would
continue playing video.
User's manual VDRPJ10 Version 2.3
Luxsar
Key to enter the
28