Setting Through Keyboard - LUXSAR VDRPJ10 Manuel D'utilisation

6.6.1

Setting through Keyboard

Set Cruise Path
(1)
(2)
(3)
Execute Cruise Path
Go back to 4.0 and press <1> to run the cruise path. Press <ESC> to exit
the cruise path setting.
User's manual VDRPJ10 Version 2.3
Press the <CRUISE> key on the keyboard to enter the Cruise mode.
Then the LCD will display «1. RUN 2. SETTING.» Press <2> to set
the cruise path.
When the LCD displays «ENTER for START POS», press
<ENTER> and rotate the dome camera with the joystick to form a
cruise path; press <ENTER> to stop cruise recording. The
percentage of the memory buffer will be displayed on the screen.
4.1 Cruise Setting
ENTER for Start Pos.
4.2 Cruise Setting
ENTER for End Pos.
When the LCD displays «ENTER for SAVING», press <ENTER> to
save this cruise path.
4.3 Cruise Setting
ENTER for Saving.
xxx P/T/Z/F/OSD Cam
Running Cruise...
4.0 Cruise Select:
1. Run 2. Setting
25