Alarm Reaction; Password Setting; Key Lock - LUXSAR VDRPJ10 Manuel D'utilisation

5.11

Alarm Reaction

The item allows users to enable/disable the alarm response function of the
keyboard. The default setting is OFF. Press ◄ or ► key to change the setting.
1.11 Alarm Reaction
[OFF]
If alarm reaction is enabled, actions would occur as follows.
(1) Buzzer beep and LCD flashes when the control
alarm signals
(2) Afterwards, if users move the joystick or press any key, the control
keyboard will try to link to the camera that broadcasts the alarm message.
(3) Once the camera is linked, video from it will be displayed in full screen on
the monitor.
5.12

Password Setting

The item allows users to change the password of a keyboard. It is required to
input a new 4-digits password twice correctly to confirm password change.
1.12.1 PassWord [****]
1.12.1 PassWord [****]
5.13

Key Lock

Press and hold this key, as shown below, for three seconds and then keys on
the control
the keys, press and hold this key again for three seconds
User's manual VDRPJ10 Version 2.3
ON
Confirm [___]
Luxsar VDRPJ10 will be locked, with the LED lightening. To unlock
Luxsar VDRPJ10 receives
15